Disk Cloner Super1 Series - Buy Cloner, Disk Duplication, Duplicator Prices from Aftindia.in

Buy Disk Cloner Super1 Series

Disk Cloner Super1 Series - Buy Cloner, Disk Duplication, Duplicator Prices from Aftindia.in

Disk Cloner Super1 Series provides a large selection of targets from 1 to 16 Tower HDD/SSD Duplicator and Eraser for sale. Super1 disc cloner ist the most economical way to duplicate 3,5" SATA and 2,5" SATA HDDs or SSDs.

Super1 Series: Tower HDD/SSD Duplicator and Eraser:

  • Targets: 1 to 1
  • Targets: 1 to 3
  • Targets: 1 to 5
  • Targets: 1 to 7
  • Targets: 1 to 11
  • Targets: 1 to 16
  • HDD/SSD Adapter Kits
  • Support: Firmware | Warranty | FAQ

Buy Disk Cloner Tower Duplicators

Main Features of Super1 Series of Tower HDD/SSD Duplicator and Eraser:

Operation:

  • Stand-alone, FPGA-based operation (Non PC-based).

Ultra-High Data Bandwidth Performance:

  • Speed transfers up to 9GB/min. (150MB/sec.)
  • Dedicated bandwidth enables high-volume duplications without speed degradation.

Read-Only Source Port:

  • There are no options to disable this built-in feature and it is integrated with all U-Reach
    duplicators.

4 Copy Modes:

  • Quick copy (Data & System): Supports Windows, Mac, and Linux.
  • All Partitions: Copies all partitions and data without unallocated partition.
  • Whole HDD: Bit-by-bit copy mode which copies exactly like the master device.
  • Percentage Copy: Users can set percentages of capacity to be copied.

5 Sanitization Modes:

  • Quick Erase, Full Erase, DoD Erase, 7-Pass Erase, and Secure Erase.

Buy Disk Cloner Super1 Series | Purchase Tower HDD/SSD Duplicator and Eraser from Aftindia.in

Compatibilities with Super1 Series of Tower HDD/SSD Duplicator and Eraser:

  • Embedded controller is designed to support capacities over 18TB+
  • Constant improvement supports latest market-available devices.
    • Supports all brands of HDDs and SSDs.
    • Supports GPT, MBR, and Advanced Formats.
    • Supports 3.5” SATA HDDs without adapter.
    • Supports SSD, 2.5” SATA HDDs and NGFF (M.2) with optional adapters.

Hardware Design:

  • Clear & independent LED light indication, no more confusion about working status.

Specification of Super1 Series of Tower HDD/SSD Duplicator and Eraser:

Here's the table for the specifications of the models you provided:

Specification HD-SU01 HD-SU03 HD-SU05 HD-SU07 HD-SU11 HD-SU16
Photo
Targets 1:1 1:3 1:5 1:7 1:11 1:16
Power Consumption (Watts) 80 250 250 300 400 600
Maximum Transfer Speed 9 GB/min. (150MB/sec.) 9 GB/min. (150MB/sec.) 9 GB/min. (150MB/sec.) 9 GB/min. (150MB/sec.) 9 GB/min. (150MB/sec.) 9 GB/min. (150MB/sec.)
Capacity Supports the latest market available capacity (up-to 18TB+) Supports the latest market available capacity (up-to 18TB+) Supports the latest market available capacity (up-to 18TB+) Supports the latest market available capacity (up-to 18TB+) Supports the latest market available capacity (up-to 18TB+) Supports the latest market available capacity (up-to 18TB+)
Operation Type Stand-alone, FPGA-based operation (Non PC-based) Stand-alone, FPGA-based operation (Non PC-based) Stand-alone, FPGA-based operation (Non PC-based) Stand-alone, FPGA-based operation (Non PC-based) Stand-alone, FPGA-based operation (Non PC-based) Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages English or Japanese English or Japanese English or Japanese English or Japanese English or Japanese English or Japanese
LCD Display Backlit Monochrome LCD Display Backlit Monochrome LCD Display Backlit Monochrome LCD Display Backlit Monochrome LCD Display Backlit Monochrome LCD Display Backlit Monochrome LCD Display
LEDs 2 LED (Red/Blue) Indicators per Port 2 LED (Red/Blue) Indicators per Port 2 LED (Red/Blue) Indicators per Port 2 LED (Red/Blue) Indicators per Port 2 LED (Red/Blue) Indicators per Port 2 LED (Red/Blue) Indicators per Port
Control Panel 4 Push Buttons (▲, ▼, OK, ESC) 4 Push Buttons (▲, ▼, OK, ESC) 4 Push Buttons (▲, ▼, OK, ESC) 4 Push Buttons (▲, ▼, OK, ESC) 4 Push Buttons (▲, ▼, OK, ESC) 4 Push Buttons (▲, ▼, OK, ESC)
Copy Modes Quick Copy (Systems & Files Copy), All Partitions Copy, Whole HDD Copy, Percentage Copy Quick Copy (Systems & Files Copy), All Partitions Copy, Whole HDD Copy, Percentage Copy Quick Copy (Systems & Files Copy), All Partitions Copy, Whole HDD Copy, Percentage Copy Quick Copy (Systems & Files Copy), All Partitions Copy, Whole HDD Copy, Percentage Copy Quick Copy (Systems & Files Copy), All Partitions Copy, Whole HDD Copy, Percentage Copy Quick Copy (Systems & Files Copy), All Partitions Copy, Whole HDD Copy, Percentage Copy
Compare Function Bit-by-bit data comparison Bit-by-bit data comparison Bit-by-bit data comparison Bit-by-bit data comparison Bit-by-bit data comparison Bit-by-bit data comparison
Sanitization Modes Quick Erase, Full Erase, DoD Erase, 7-Pass Erase, and Secure Erase Quick Erase, Full Erase, DoD Erase, 7-Pass Erase, and Secure Erase Quick Erase, Full Erase, DoD Erase, 7-Pass Erase, and Secure Erase Quick Erase, Full Erase, DoD Erase, 7-Pass Erase, and Secure Erase Quick Erase, Full Erase, DoD Erase, 7-Pass Erase, and Secure Erase Quick Erase, Full Erase, DoD Erase, 7-Pass Erase, and Secure Erase
Skip Bad-Sectors Set minimum acceptable bad sector quantity Set minimum acceptable bad sector quantity Set minimum acceptable bad sector quantity Set minimum acceptable bad sector quantity Set minimum acceptable bad sector quantity Set minimum acceptable bad sector quantity
Compatible Devices 3.5” SATA HDDs 3.5” SATA HDDs 3.5” SATA HDDs 3.5” SATA HDDs 3.5” SATA HDDs 3.5” SATA HDDs
Compatible Devices (with required adapter) 2.5” SATA HDD/SSD and NGFF (M.2) 2.5” SATA HDD/SSD and NGFF (M.2) 2.5” SATA HDD/SSD and NGFF (M.2) 2.5” SATA HDD/SSD and NGFF (M.2) 2.5” SATA HDD/SSD and NGFF (M.2) 2.5” SATA HDD/SSD and NGFF (M.2)
Compatible Protocol All Super1 Series duplicators require SATA I supported devices All Super1 Series duplicators require SATA I supported devices All Super1 Series duplicators require SATA I supported devices All Super1 Series duplicators require SATA I supported devices All Super1 Series duplicators require SATA I supported devices All Super1 Series duplicators require SATA I supported devices
Supported Formats Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX)
Whole HDD Copy All Formats, including proprietary formats All Formats, including proprietary formats All Formats, including proprietary formats All Formats, including proprietary formats All Formats, including proprietary formats All Formats, including proprietary formats
Supported O/S All (Windows, Mac, Linux, and other stand-alone systems) All (Windows, Mac, Linux, and other stand-alone systems) All (Windows, Mac, Linux, and other stand-alone systems) All (Windows, Mac, Linux, and other stand-alone systems) All (Windows, Mac, Linux, and other stand-alone systems) All (Windows, Mac, Linux, and other stand-alone systems)
Power Supply Universal Power: 115VAC or 230VAC, 50/60Hz Universal Power: 115VAC or 230VAC, 50/60Hz Universal Power: 115VAC or 230VAC, 50/60Hz Universal Power: 115VAC or 230VAC, 50/60Hz Universal Power: 115VAC or 230VAC, 50/60Hz Universal Power: 115VAC or 230VAC, 50/60Hz
Working Temperature 5°C ~ 45°C (41°F ~ 113°F) 5°C ~ 45°C (41°F ~ 113°F) 5°C ~ 45°C (41°F ~ 113°F) 5°C ~ 45°C (41°F ~ 113°F) 5°C ~ 45°C (41°F ~ 113°F) 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperature -20°C ~85°C (-4°F ~ 185°F) -20°C ~85°C (-4°F ~ 185°F) -20°C ~85°C (-4°F ~ 185°F) -20°C ~85°C (-4°F ~ 185°F) -20°C ~85°C (-4°F ~ 185°F) -20°C ~85°C (-4°F ~ 185°F)
Working Humidity 20% ~ 80% 20% ~ 80% 20% ~ 80% 20% ~ 80% 20% ~ 80% 20% ~ 80%
Storage Humidity 5% ~ 95% 5% ~ 95% 5% ~ 95% 5% ~ 95% 5% ~ 95% 5% ~ 95%
Product Dimensions TBA TBA TBA TBA TBA TBA
Weight TBA TBA TBA TBA TBA TBA
Certifications FCC, CE, RoHS FCC, CE, RoHS FCC, CE, RoHS FCC, CE, RoHS FCC, CE, RoHS FCC, CE, RoHS

 

Datasheet for Super1 series

For further information regarding the Disk Cloner SuperOne Series Tower Duplicator. Check out our datasheet here.

hdd duplicator comparision chart

Order Your Disk Cloner SuperOne Series Tower Duplicator Today!

Order Your Disk Cloner SuperOne Series Tower Duplicator Today!

HDD/SSD Duplicator and Eraser...

What is Disk Cloner Tower Duplicators...

Disk Cloner Tower Duplicators are specialized devices designed for efficiently copying data from one hard drive or SSD to multiple drives simultaneously. These duplicators feature multiple drive bays, allowing users to clone a single source drive to several target drives at once, making the data duplication process faster and more efficient. Ideal for IT professionals, businesses, and home users alike, these devices offer a reliable solution for data backup, recovery, and distribution.

Looking for an efficient and cost-effective way to duplicate your 3.5" SATA and 2.5" SATA HDDs or SSDs? The U-Reach Super1 Disc Cloner is your answer. This user-friendly device allows you to effortlessly clone your drives—simply plug in your master and target devices, press the "OK" button, and let the Super1 do the rest.

With impressive data transfer speeds of up to 9GB per minute, the U-Reach Super1 ensures that your data is copied bit-by-bit with precision and reliability. Whether you're a professional needing to duplicate multiple drives or a home user looking for a simple solution, this disc cloner meets all your needs. Experience seamless data duplication and enhance your productivity with the U-Reach Super1 Disc Cloner today!